Plastics & Masterbatch

Pearlescent / Metallic Series, 15–30 µm is the standard for PP/ABS/PC masterbatch — good heat stability and dispersion. We match per your resin and temperature profile.

Our industrial-grade pearl series are used in masterbatch and direct injection. Recommended processing temperature is grade-specific — share your resin and profile and we’ll match the family.

Pearl gives softer iridescence; metallic gives sharper mirror reflection. Many housings blend both. We supply color-matched samples for your resin.

Yes — fine pearl / interference (10–30 µm) extrudes smoothly without die-line defects. Avoid oversize particles that cause streaks.

Yes — our weatherable pearl family (20–60 µm) is UV-tested for longer outdoor gloss. Confirm your substrate/resin for full spec.

Loading depends on opacity, film thickness and density. Start low and titrate to target hiding/gloss. We provide TDS starting points.

Some grades span processes, but surface treatment, particle size and certification differ. Plastics need heat stability; we map the correct grade per process.

We support REACH/registration documentation under confidentiality. We do not publish ECHA numbers on public pages; files available under NDA per grade/shipment.

Use a compatible surface-treated grade and proper dispersion; avoid over-loading. Pre-disperse into a masterbatch concentrate before final dilution.

Synthetic mica / Chameleon Series gives high heat stability and consistent weathering; borosilicate is the premium clarity option.

Yes — send a physical sample or Pantone reference; we return a matched proposal including particle size and substrate for your resin and processing temperature.

Yes. Tell us what you make and we map the right effect pigment to your process — a one-stop color solution from design to finished goods.

Yes. Free 5–10g samples ship within 3 working days in foil bags or bottles.

Most products have a 1kg MOQ, with a few from 10g, with packaging from 5–10g samples up to 25kg.

Yes. For qualifying orders we stand behind product quality and committed lead time — if either falls short, we make it right through replacement, rework or refund.

Send a sample and we return a matched formula within 48 hours, supported by 10,000+ standard colors.

Yes. We export to 100+ countries and have served the global market since 2003 (20+ years). We handle international shipping and the documentation needed for cosmetic / food-grade imports where required.

Some pigments span several uses — e.g. pearlescent and glow appear in cosmetics, coatings and DIY — but the right grade and certification differ by application. Tell us your uses and we map the correct grade.